Detailed description
Test steps:
Step 1: Place the specimen and test assembly at room temperature (if refrigerated or frozen). After thawing, fully mix the specimen before determination.
Step 2: When ready for testing, open the bag at the notch and take out the equipment. Place the test equipment on a clean, flat surface.
Step 3: Make sure to use the ID number of the specimen to mark the equipment.
Step 4: For whole blood examination
-One drop of whole blood (about 30-35 μ 50) Inject into the sample hole.
-Then immediately add 2 drops (approx. 60-70 μ 50) Sample diluent.
Step 5: Set the timer.
Step 6: The results can be read within 20 minutes. Positive results can appear in a short time (1 minute).
Do not read the results after 30 minutes. To avoid confusion, discard the test equipment after interpreting the results.